有名な乗法的関数
(multiplicative-function/mf-famous-series.hpp)
- View this file on GitHub
- Last update: 2024-05-03 23:21:26+09:00
- Include:
#include "multiplicative-function/mf-famous-series.hpp"
有名な乗法的関数
来るべきDGF(ディリクレ母関数)の流行に備えて(本当に流行るのか?)、自分が理解していることをメモしておく…
乗法的関数
$f(n)$が任意の$\gcd(a,b) = 1$である自然数$a,b$に対して$f(ab) = f(a)f(b)$となる時、$f(n)$は乗法的であると呼ぶ。特に任意の$a,b$について$f(ab)=f(a)f(b)$が成り立つ時は完全乗法的であると呼ぶ。
乗法的関数の重要な性質は以下のようなものが挙げられる。
- $f(n),g(n)$が乗法的である時、$h(n)=f(n)g(n)$も乗法的である。
- $f(n),g(n)$が乗法的である時、ディリクレの畳み込みで得られる関数$h(n)=\sum_{d\mid n}f(d)g\left(\frac{n}{d}\right)$も乗法的である。
また、乗法的関数に関するアルゴリズムは以下のものが知られている。
- $f(n)$が乗法的であり、かつ$f(p^k)$が$\mathrm{O}(1)$で求まるとき、
有名な乗法的関数
- 定数関数 $\mathrm{I}(n)=c$
- 恒等写像 $\mathrm{Id}(n)=n$
- 指数関数 $\mathrm{Id}_a(n)=n^a$
- Unit Function $\epsilon(n)=[n = 1]$
- メビウス関数 $\mu(p^k) =[k = 0]-[k = 1]$
- 約数関数 $\sigma_a(p^k) = \sum_{i=0}^k p^{ai}$
- トーシェント関数 $\phi(p^k) = p^k - p^{k-1}$
このうち下の3つは次の畳み込みの関係が知られている。
- メビウス関数 $\sum_{d \mid n} \mu(n) = \epsilon(n)$
- 約数関数 $\sum_{d \mid n} d^a = \sigma_a(n)$
- トーシェント関数 $\sum_{d \mid n} \phi(d) = n$
メビウス関数 $\mu(n)$
メビウス関数に関する説明はここに詳しく書いた。
競技プログラミングにおいてのメビウス関数の利用法は(雑に説明すると)包除原理の$(-1)^k$と似た使い方をすることが多い。実際に具体例を見てみる。
例題1
- $N$の約数$n$に対して$g(n)=\sum_{d\mid n}f(d)$と$\mu(n)$がわかっているとする。この時$f(N)$を$\mathrm{O}(\sigma(N))$で計算せよ。
約数系包除を使えば$\mathrm{O}(\sigma(N)^2)$で解けるがより高速な解法を考えたい。 まずは反転公式を使わずに考察してみる。具体的な$N$についていくつか実験してみると、
\[f(16)=g(16)-g(8)\] \[f(12)=g(12)-g(6)-g(4)+g(2)\] \[f(30)=g(30)-g(15)-g(10)-g(6)+g(5)+g(3)+g(2)-g(1)\]のようになり、これは包除原理+BIT全探索で解くことが出来る。(tsutajさんの非常にわかりやすい包除PDFに類題の詳しい説明がある。)
一方、反転公式を使うと、例えば$n=12$の時は
\[f(12) = \sum_{d \in \lbrace 1,2,3,4,6,12\rbrace}\mu\left(\frac{n}{d}\right)g(d)=g(12)-g(6)-g(4)+g(2)\]となり包除原理によって得られる結果と一致する。
下位集合に対するゼータ変換が包除原理で解けることと、約数集合に対するゼータ変換がメビウス関数で解けることは同じような関係にある(?)と言える。
例題2:Cube-loving Numbers (HackerRank)
- $N$が与えられるので、「自然数$a \gt 1,b\geq 1$を用いて$a^3\times b$と表せる$N$以下の自然数の個数」を$\mathrm{O}(\sqrt[3]{N})$で計算せよ。
$1\leq n\leq N$において自然数$a,b$を用いて$n=a^3\times b$と表せる$n$の個数$g(a)$は$g(a)=\lfloor\frac{N}{a^3}\rfloor$と容易に表せるので、この式をうまく利用して答えを求めたい。(直感的には、$g(n)$は一つの自然数を複数回カウントする関数なのでメビウス変換したいという気持ちになる。)
対象を重複なく数え上げるために、自然数$n$に一対一対応する$(a,b)$を決定したい。具体的には、「$n=A^3\times B$を満たす自然数の組$(A,B)$の中で最も$B$が小さい組」を$n$に対応する組$(a,b)$とおく。そして、$f(a)$を「$(a,\frac{n}{a^3})$と対応している$N$以下の自然数$n$の個数」とおく。
$f$と$g$の関係式を得るために、$g(a)$でカウントされている自然数$n$が$f$のどこでカウントされているかを考える。$n=a^3\times b$としたとき、$b$に一対一対応する整数の組を$(c,d)$とおくと、$n$に対応する組は$(ca,d)$であるから$f(ca)$で数え上げられていることが分かる。逆に$f(ca)$で数え上げられた$n$が$g(a)$で数えられていることも示せる。よって$f(a)$と$g(a)$の間には
\[g(a)=\sum_{a\mid m}f(m) \leftrightarrow f(a)=\sum_{a\mid m}\mu\left(\frac{m}{a}\right)g(m)\]という倍数変換の関係式が成り立つことがわかる。また、求める答えは$M=\lfloor\sqrt[3]{N}\rfloor$と置いたとき$\sum_{a=2}^Mf(a)$である。 ($M\lt a$のとき$f(a)=g(a)=0$である事実を利用している。)
よって倍数メビウス変換を用いれば$\mathrm{O}(M\log \log M)$で計算できることが示せたが、メビウス関数を用いることでさらなる高速化を図りたい。$\sum_{a=2}^Mf(a)$を$g(m)$の線形和に分解したときの$g(m)$の寄与を考察すると、
\[\sum_{a=2}^M f(a)=\sum_{2\leq a\leq M, a\mid m} \left( \mu\left(\frac{m}{a}\right)g(m)\right)\] \[=\sum_{2\leq m\leq M} g(m)\left(\sum_{a\mid m,a\neq 1}\mu\left(\frac{m}{a}\right)\right)\] \[=\sum_{2\leq m\leq M} g(m)(-\mu(m)+\sum_{a\mid m}\mu(a))=-\sum_{2\leq m\leq M} g(m)\mu(m)\]と非常にきれいな式になる。$\mu(m)$および$g(m)$は線形で列挙できるため、求める答えも線形で列挙できる。以上よりこの問題を$\mathrm{O}(\sqrt[3]{N})$で解くことが出来た。
Depends on
乗法的関数の列挙 (multiplicative-function/enamurate-multiplicative-function.hpp)
prime/prime-enumerate.hpp
template/bitop.hpp
template/debug.hpp
template/inout.hpp
template/macro.hpp
template/template.hpp
template/util.hpp
Required by
Verified with
verify/verify-unit-test/mf.test.cpp
verify/verify-unit-test/sum-of-mf.test.cpp
verify/verify-yosupo-math/yosupo-count-squarefrees.test.cpp
Code
#pragma once
#include "../template/template.hpp"
#include "enamurate-multiplicative-function.hpp"
namespace multiplicative_function {
template <typename T>
T moebius(int, int, int c) {
return c == 0 ? 1 : c == 1 ? -1 : 0;
}
template <typename T>
T sigma0(int, int, int c) {
return c + 1;
}
template <typename T>
T sigma1(int n, int p, int) {
return (n - 1) / (p - 1) + n;
}
template <typename T>
T totient(int n, int p, int) {
return n - n / p;
}
} // namespace multiplicative_function
template <typename T>
static constexpr vector<T> mobius_function(int n) {
enamurate_multiplicative_function<T, multiplicative_function::moebius<T>> em(
n);
return em.run();
}
template <typename T>
static constexpr vector<T> sigma0(int n) {
enamurate_multiplicative_function<T, multiplicative_function::sigma0<T>> em(
n);
return em.run();
}
template <typename T>
static constexpr vector<T> sigma1(int n) {
enamurate_multiplicative_function<T, multiplicative_function::sigma1<T>> em(
n);
return em.run();
}
template <typename T>
static constexpr vector<T> totient(int n) {
enamurate_multiplicative_function<T, multiplicative_function::totient<T>> em(
n);
return em.run();
}
/**
* @brief 有名な乗法的関数
* @docs docs/multiplicative-function/mf-famous-series.md
*/
#line 2 "multiplicative-function/mf-famous-series.hpp"
#line 2 "template/template.hpp"
using namespace std;
// intrinstic
#include <immintrin.h>
#include <algorithm>
#include <array>
#include <bitset>
#include <cassert>
#include <cctype>
#include <cfenv>
#include <cfloat>
#include <chrono>
#include <cinttypes>
#include <climits>
#include <cmath>
#include <complex>
#include <cstdarg>
#include <cstddef>
#include <cstdint>
#include <cstdio>
#include <cstdlib>
#include <cstring>
#include <deque>
#include <fstream>
#include <functional>
#include <initializer_list>
#include <iomanip>
#include <ios>
#include <iostream>
#include <istream>
#include <iterator>
#include <limits>
#include <list>
#include <map>
#include <memory>
#include <new>
#include <numeric>
#include <ostream>
#include <queue>
#include <random>
#include <set>
#include <sstream>
#include <stack>
#include <streambuf>
#include <string>
#include <tuple>
#include <type_traits>
#include <typeinfo>
#include <unordered_map>
#include <unordered_set>
#include <utility>
#include <vector>
// utility
#line 1 "template/util.hpp"
namespace Nyaan {
using ll = long long;
using i64 = long long;
using u64 = unsigned long long;
using i128 = __int128_t;
using u128 = __uint128_t;
template <typename T>
using V = vector<T>;
template <typename T>
using VV = vector<vector<T>>;
using vi = vector<int>;
using vl = vector<long long>;
using vd = V<double>;
using vs = V<string>;
using vvi = vector<vector<int>>;
using vvl = vector<vector<long long>>;
template <typename T>
using minpq = priority_queue<T, vector<T>, greater<T>>;
template <typename T, typename U>
struct P : pair<T, U> {
template <typename... Args>
P(Args... args) : pair<T, U>(args...) {}
using pair<T, U>::first;
using pair<T, U>::second;
P &operator+=(const P &r) {
first += r.first;
second += r.second;
return *this;
}
P &operator-=(const P &r) {
first -= r.first;
second -= r.second;
return *this;
}
P &operator*=(const P &r) {
first *= r.first;
second *= r.second;
return *this;
}
template <typename S>
P &operator*=(const S &r) {
first *= r, second *= r;
return *this;
}
P operator+(const P &r) const { return P(*this) += r; }
P operator-(const P &r) const { return P(*this) -= r; }
P operator*(const P &r) const { return P(*this) *= r; }
template <typename S>
P operator*(const S &r) const {
return P(*this) *= r;
}
P operator-() const { return P{-first, -second}; }
};
using pl = P<ll, ll>;
using pi = P<int, int>;
using vp = V<pl>;
constexpr int inf = 1001001001;
constexpr long long infLL = 4004004004004004004LL;
template <typename T>
int sz(const T &t) {
return t.size();
}
template <typename T, typename U>
inline bool amin(T &x, U y) {
return (y < x) ? (x = y, true) : false;
}
template <typename T, typename U>
inline bool amax(T &x, U y) {
return (x < y) ? (x = y, true) : false;
}
template <typename T>
inline T Max(const vector<T> &v) {
return *max_element(begin(v), end(v));
}
template <typename T>
inline T Min(const vector<T> &v) {
return *min_element(begin(v), end(v));
}
template <typename T>
inline long long Sum(const vector<T> &v) {
return accumulate(begin(v), end(v), 0LL);
}
template <typename T>
int lb(const vector<T> &v, const T &a) {
return lower_bound(begin(v), end(v), a) - begin(v);
}
template <typename T>
int ub(const vector<T> &v, const T &a) {
return upper_bound(begin(v), end(v), a) - begin(v);
}
constexpr long long TEN(int n) {
long long ret = 1, x = 10;
for (; n; x *= x, n >>= 1) ret *= (n & 1 ? x : 1);
return ret;
}
template <typename T, typename U>
pair<T, U> mkp(const T &t, const U &u) {
return make_pair(t, u);
}
template <typename T>
vector<T> mkrui(const vector<T> &v, bool rev = false) {
vector<T> ret(v.size() + 1);
if (rev) {
for (int i = int(v.size()) - 1; i >= 0; i--) ret[i] = v[i] + ret[i + 1];
} else {
for (int i = 0; i < int(v.size()); i++) ret[i + 1] = ret[i] + v[i];
}
return ret;
};
template <typename T>
vector<T> mkuni(const vector<T> &v) {
vector<T> ret(v);
sort(ret.begin(), ret.end());
ret.erase(unique(ret.begin(), ret.end()), ret.end());
return ret;
}
template <typename F>
vector<int> mkord(int N, F f) {
vector<int> ord(N);
iota(begin(ord), end(ord), 0);
sort(begin(ord), end(ord), f);
return ord;
}
template <typename T>
vector<int> mkinv(vector<T> &v) {
int max_val = *max_element(begin(v), end(v));
vector<int> inv(max_val + 1, -1);
for (int i = 0; i < (int)v.size(); i++) inv[v[i]] = i;
return inv;
}
vector<int> mkiota(int n) {
vector<int> ret(n);
iota(begin(ret), end(ret), 0);
return ret;
}
template <typename T>
T mkrev(const T &v) {
T w{v};
reverse(begin(w), end(w));
return w;
}
template <typename T>
bool nxp(T &v) {
return next_permutation(begin(v), end(v));
}
// 返り値の型は入力の T に依存
// i 要素目 : [0, a[i])
template <typename T>
vector<vector<T>> product(const vector<T> &a) {
vector<vector<T>> ret;
vector<T> v;
auto dfs = [&](auto rc, int i) -> void {
if (i == (int)a.size()) {
ret.push_back(v);
return;
}
for (int j = 0; j < a[i]; j++) v.push_back(j), rc(rc, i + 1), v.pop_back();
};
dfs(dfs, 0);
return ret;
}
// F : function(void(T&)), mod を取る操作
// T : 整数型のときはオーバーフローに注意する
template <typename T>
T Power(T a, long long n, const T &I, const function<void(T &)> &f) {
T res = I;
for (; n; f(a = a * a), n >>= 1) {
if (n & 1) f(res = res * a);
}
return res;
}
// T : 整数型のときはオーバーフローに注意する
template <typename T>
T Power(T a, long long n, const T &I = T{1}) {
return Power(a, n, I, function<void(T &)>{[](T &) -> void {}});
}
template <typename T>
T Rev(const T &v) {
T res = v;
reverse(begin(res), end(res));
return res;
}
template <typename T>
vector<T> Transpose(const vector<T> &v) {
using U = typename T::value_type;
if(v.empty()) return {};
int H = v.size(), W = v[0].size();
vector res(W, T(H, U{}));
for (int i = 0; i < H; i++) {
for (int j = 0; j < W; j++) {
res[j][i] = v[i][j];
}
}
return res;
}
template <typename T>
vector<T> Rotate(const vector<T> &v, int clockwise = true) {
using U = typename T::value_type;
int H = v.size(), W = v[0].size();
vector res(W, T(H, U{}));
for (int i = 0; i < H; i++) {
for (int j = 0; j < W; j++) {
if (clockwise) {
res[W - 1 - j][i] = v[i][j];
} else {
res[j][H - 1 - i] = v[i][j];
}
}
}
return res;
}
} // namespace Nyaan
#line 58 "template/template.hpp"
// bit operation
#line 1 "template/bitop.hpp"
namespace Nyaan {
__attribute__((target("popcnt"))) inline int popcnt(const u64 &a) {
return __builtin_popcountll(a);
}
inline int lsb(const u64 &a) { return a ? __builtin_ctzll(a) : 64; }
inline int ctz(const u64 &a) { return a ? __builtin_ctzll(a) : 64; }
inline int msb(const u64 &a) { return a ? 63 - __builtin_clzll(a) : -1; }
template <typename T>
inline int gbit(const T &a, int i) {
return (a >> i) & 1;
}
template <typename T>
inline void sbit(T &a, int i, bool b) {
if (gbit(a, i) != b) a ^= T(1) << i;
}
constexpr long long PW(int n) { return 1LL << n; }
constexpr long long MSK(int n) { return (1LL << n) - 1; }
} // namespace Nyaan
#line 61 "template/template.hpp"
// inout
#line 1 "template/inout.hpp"
namespace Nyaan {
template <typename T, typename U>
ostream &operator<<(ostream &os, const pair<T, U> &p) {
os << p.first << " " << p.second;
return os;
}
template <typename T, typename U>
istream &operator>>(istream &is, pair<T, U> &p) {
is >> p.first >> p.second;
return is;
}
template <typename T>
ostream &operator<<(ostream &os, const vector<T> &v) {
int s = (int)v.size();
for (int i = 0; i < s; i++) os << (i ? " " : "") << v[i];
return os;
}
template <typename T>
istream &operator>>(istream &is, vector<T> &v) {
for (auto &x : v) is >> x;
return is;
}
istream &operator>>(istream &is, __int128_t &x) {
string S;
is >> S;
x = 0;
int flag = 0;
for (auto &c : S) {
if (c == '-') {
flag = true;
continue;
}
x *= 10;
x += c - '0';
}
if (flag) x = -x;
return is;
}
istream &operator>>(istream &is, __uint128_t &x) {
string S;
is >> S;
x = 0;
for (auto &c : S) {
x *= 10;
x += c - '0';
}
return is;
}
ostream &operator<<(ostream &os, __int128_t x) {
if (x == 0) return os << 0;
if (x < 0) os << '-', x = -x;
string S;
while (x) S.push_back('0' + x % 10), x /= 10;
reverse(begin(S), end(S));
return os << S;
}
ostream &operator<<(ostream &os, __uint128_t x) {
if (x == 0) return os << 0;
string S;
while (x) S.push_back('0' + x % 10), x /= 10;
reverse(begin(S), end(S));
return os << S;
}
void in() {}
template <typename T, class... U>
void in(T &t, U &...u) {
cin >> t;
in(u...);
}
void out() { cout << "\n"; }
template <typename T, class... U, char sep = ' '>
void out(const T &t, const U &...u) {
cout << t;
if (sizeof...(u)) cout << sep;
out(u...);
}
struct IoSetupNya {
IoSetupNya() {
cin.tie(nullptr);
ios::sync_with_stdio(false);
cout << fixed << setprecision(15);
cerr << fixed << setprecision(7);
}
} iosetupnya;
} // namespace Nyaan
#line 64 "template/template.hpp"
// debug
#line 1 "template/debug.hpp"
namespace DebugImpl {
template <typename U, typename = void>
struct is_specialize : false_type {};
template <typename U>
struct is_specialize<
U, typename conditional<false, typename U::iterator, void>::type>
: true_type {};
template <typename U>
struct is_specialize<
U, typename conditional<false, decltype(U::first), void>::type>
: true_type {};
template <typename U>
struct is_specialize<U, enable_if_t<is_integral<U>::value, void>> : true_type {
};
void dump(const char& t) { cerr << t; }
void dump(const string& t) { cerr << t; }
void dump(const bool& t) { cerr << (t ? "true" : "false"); }
void dump(__int128_t t) {
if (t == 0) cerr << 0;
if (t < 0) cerr << '-', t = -t;
string S;
while (t) S.push_back('0' + t % 10), t /= 10;
reverse(begin(S), end(S));
cerr << S;
}
void dump(__uint128_t t) {
if (t == 0) cerr << 0;
string S;
while (t) S.push_back('0' + t % 10), t /= 10;
reverse(begin(S), end(S));
cerr << S;
}
template <typename U,
enable_if_t<!is_specialize<U>::value, nullptr_t> = nullptr>
void dump(const U& t) {
cerr << t;
}
template <typename T>
void dump(const T& t, enable_if_t<is_integral<T>::value>* = nullptr) {
string res;
if (t == Nyaan::inf) res = "inf";
if constexpr (is_signed<T>::value) {
if (t == -Nyaan::inf) res = "-inf";
}
if constexpr (sizeof(T) == 8) {
if (t == Nyaan::infLL) res = "inf";
if constexpr (is_signed<T>::value) {
if (t == -Nyaan::infLL) res = "-inf";
}
}
if (res.empty()) res = to_string(t);
cerr << res;
}
template <typename T, typename U>
void dump(const pair<T, U>&);
template <typename T>
void dump(const pair<T*, int>&);
template <typename T>
void dump(const T& t,
enable_if_t<!is_void<typename T::iterator>::value>* = nullptr) {
cerr << "[ ";
for (auto it = t.begin(); it != t.end();) {
dump(*it);
cerr << (++it == t.end() ? "" : ", ");
}
cerr << " ]";
}
template <typename T, typename U>
void dump(const pair<T, U>& t) {
cerr << "( ";
dump(t.first);
cerr << ", ";
dump(t.second);
cerr << " )";
}
template <typename T>
void dump(const pair<T*, int>& t) {
cerr << "[ ";
for (int i = 0; i < t.second; i++) {
dump(t.first[i]);
cerr << (i == t.second - 1 ? "" : ", ");
}
cerr << " ]";
}
void trace() { cerr << endl; }
template <typename Head, typename... Tail>
void trace(Head&& head, Tail&&... tail) {
cerr << " ";
dump(head);
if (sizeof...(tail) != 0) cerr << ",";
trace(std::forward<Tail>(tail)...);
}
} // namespace DebugImpl
#ifdef NyaanDebug
#define trc(...) \
do { \
cerr << "## " << #__VA_ARGS__ << " = "; \
DebugImpl::trace(__VA_ARGS__); \
} while (0)
#else
#define trc(...) (void(0))
#endif
#ifdef NyaanLocal
#define trc2(...) \
do { \
cerr << "## " << #__VA_ARGS__ << " = "; \
DebugImpl::trace(__VA_ARGS__); \
} while (0)
#else
#define trc2(...) (void(0))
#endif
#line 67 "template/template.hpp"
// macro
#line 1 "template/macro.hpp"
#define each(x, v) for (auto&& x : v)
#define each2(x, y, v) for (auto&& [x, y] : v)
#define all(v) (v).begin(), (v).end()
#define rep(i, N) for (long long i = 0; i < (long long)(N); i++)
#define repr(i, N) for (long long i = (long long)(N)-1; i >= 0; i--)
#define rep1(i, N) for (long long i = 1; i <= (long long)(N); i++)
#define repr1(i, N) for (long long i = (N); (long long)(i) > 0; i--)
#define reg(i, a, b) for (long long i = (a); i < (b); i++)
#define regr(i, a, b) for (long long i = (b)-1; i >= (a); i--)
#define fi first
#define se second
#define ini(...) \
int __VA_ARGS__; \
in(__VA_ARGS__)
#define inl(...) \
long long __VA_ARGS__; \
in(__VA_ARGS__)
#define ins(...) \
string __VA_ARGS__; \
in(__VA_ARGS__)
#define in2(s, t) \
for (int i = 0; i < (int)s.size(); i++) { \
in(s[i], t[i]); \
}
#define in3(s, t, u) \
for (int i = 0; i < (int)s.size(); i++) { \
in(s[i], t[i], u[i]); \
}
#define in4(s, t, u, v) \
for (int i = 0; i < (int)s.size(); i++) { \
in(s[i], t[i], u[i], v[i]); \
}
#define die(...) \
do { \
Nyaan::out(__VA_ARGS__); \
return; \
} while (0)
#line 70 "template/template.hpp"
namespace Nyaan {
void solve();
}
int main() { Nyaan::solve(); }
#line 2 "multiplicative-function/enamurate-multiplicative-function.hpp"
#line 2 "prime/prime-enumerate.hpp"
// Prime Sieve {2, 3, 5, 7, 11, 13, 17, ...}
vector<int> prime_enumerate(int N) {
vector<bool> sieve(N / 3 + 1, 1);
for (int p = 5, d = 4, i = 1, sqn = sqrt(N); p <= sqn; p += d = 6 - d, i++) {
if (!sieve[i]) continue;
for (int q = p * p / 3, r = d * p / 3 + (d * p % 3 == 2), s = 2 * p,
qe = sieve.size();
q < qe; q += r = s - r)
sieve[q] = 0;
}
vector<int> ret{2, 3};
for (int p = 5, d = 4, i = 1; p <= N; p += d = 6 - d, i++)
if (sieve[i]) ret.push_back(p);
while (!ret.empty() && ret.back() > N) ret.pop_back();
return ret;
}
#line 5 "multiplicative-function/enamurate-multiplicative-function.hpp"
// f(n, p, c) : n = pow(p, c), f is multiplicative function
template <typename T, T (*f)(int, int, int)>
struct enamurate_multiplicative_function {
enamurate_multiplicative_function(int _n)
: ps(prime_enumerate(_n)), a(_n + 1, T()), n(_n), p(ps.size()) {}
vector<T> run() {
a[1] = 1;
dfs(-1, 1, 1);
return a;
}
private:
vector<int> ps;
vector<T> a;
int n, p;
void dfs(int i, long long x, T y) {
a[x] = y;
if (y == T()) return;
for (int j = i + 1; j < p; j++) {
long long nx = x * ps[j];
long long dx = ps[j];
if (nx > n) break;
for (int c = 1; nx <= n; nx *= ps[j], dx *= ps[j], ++c) {
dfs(j, nx, y * f(dx, ps[j], c));
}
}
}
};
/**
* @brief 乗法的関数の列挙
*/
#line 5 "multiplicative-function/mf-famous-series.hpp"
namespace multiplicative_function {
template <typename T>
T moebius(int, int, int c) {
return c == 0 ? 1 : c == 1 ? -1 : 0;
}
template <typename T>
T sigma0(int, int, int c) {
return c + 1;
}
template <typename T>
T sigma1(int n, int p, int) {
return (n - 1) / (p - 1) + n;
}
template <typename T>
T totient(int n, int p, int) {
return n - n / p;
}
} // namespace multiplicative_function
template <typename T>
static constexpr vector<T> mobius_function(int n) {
enamurate_multiplicative_function<T, multiplicative_function::moebius<T>> em(
n);
return em.run();
}
template <typename T>
static constexpr vector<T> sigma0(int n) {
enamurate_multiplicative_function<T, multiplicative_function::sigma0<T>> em(
n);
return em.run();
}
template <typename T>
static constexpr vector<T> sigma1(int n) {
enamurate_multiplicative_function<T, multiplicative_function::sigma1<T>> em(
n);
return em.run();
}
template <typename T>
static constexpr vector<T> totient(int n) {
enamurate_multiplicative_function<T, multiplicative_function::totient<T>> em(
n);
return em.run();
}
/**
* @brief 有名な乗法的関数
* @docs docs/multiplicative-function/mf-famous-series.md
*/